PCI-Express Ultra-ATA133 + SATA-II Combo Card (1 x PATA + 1 x eSATA + 1 x SATA, RAID version)

Part #: SD-EJ363-1A1E1IR-A4-01

Download: Drivers / Documents

Other Pictures:
Win7 Win 2008 32/64-bit Win Vista 32/64-bit Win 2003 32/64-bit Win XP 32/64-bit 2000
PCI Express sATA3G SATA 3G Ultra133 RAID ROHS CEFCC

Introduction

PCI-Express Ultra-ATA133 + SATA-II Combo Card (1 x internal PATA port + 1 x external eSATA port + 1 x internal SATA port, RAID version)

This PCI-Express Ultra-ATA133 + SATA-II Combo Card gives the user the flexibility to have both PATA and SATA interfaces on one PCI Express card. By using this card, it saves an extra PCI-Express slot for other PCI-Express card to be installed on to the PC. This is helpful to user when there are just a limited number of PCI-Express slots available on the PC

Features & Specification

General
Compliant with Serial ATA AHCI (Advanced Host Controller Interface) Specification Rev 1.0
Compliant with Bus Master Programming interface for IDE ATA Controllers Revision 1.0
Compliant with PCI Express Base Spec. Revision 1.0a
Compliant with Serial ATA High Speed Serialized AT Attachment Spec. Revision 1.0a
Compliant with Serial ATA II Spec.
1-Lane 2.5Gbps PCI Express bus
Supports Windows 7 / Vista / XP / 2000 / Server2003-2008 32/64-bit operating system
Supports RAID 0, 1, 0+1, JBOD (for RAID version only)

Parallel ATA (PATA) interface
Supports up to Ultra-DMA 6 transfer mode
Transfer rate up to 133MBps

Serial ATA (SATA) interface
Supports SATA II (Up to 3.0Gbps)
Supports Native Command Queue (NCQ) on SATA II port
Supports Port Multiplier with Command-based Switching on SATA II port
Supports Hot Plugging on SATA II port

Remarks
Non-RAID version is available (Model no. SD-EJ363-1A1E1I-A4-01)

Package Content
PCI-Express Ultra-ATA133 + SATA-II Combo Card x 1
User Manual x 1
Driver CD x 1

Model

Part Number Chipset
 SD-EJ363-1A1E1IR-A4-01 Jmicron